- Measures Conductivity, Resistivity and TDS with ±0.5% accuracy
- Automatic single or multi-point calibration with preset standard conductivity values at 84 µS/am, 1413 µS/cm, 12.88 mS/cm, 111.8mS/cm or manual multi-point calibration (up to 4 points) for greater flexibility
- Auto-Ranging Capability
- Accepts 2-cell or 4-cell Conductivity Electrodes
- User customization with advanced set up mode
- Automatically corrects for temperature fluctuations with ATC probe
- Built in replatinising circuit allows electrode maintenance
- Expanded Memory stores and recalls up to 100 data sets
- Self-Diagnostic with message codes for easy troubleshooting
Specifications | ECCON150043S |
Conductivity Range | 0 to 200 , 200 to 2000 micro Siemens; 2.000 to 20.00 mS, 20 to 500.0 mS/cm* |
Resolution/Accuracy | 0.001, 0.01, 0.1 micro Siemens;0.001,0.01,0.1 mS/cm ; ±0.5% of Full scale reading |
Resistivity Range | 0 to 19.99 ,20 to 199.9 KOhm, 200 KOhm to 1.999 MOhm,2.000 to 100.0 MOhm |
Resolution/Accuracy | 0.1, 0.01, 0.001 KOhm,0.01,0.001 MOhm ; ±0.5% of Full scale reading |
TDS Range | 0 to 199.9 ,200.0-1999 ppm; 2000 to 19999 ppm, 20000 to 99999 ppm (Depending on TDS factor) |
Resolution/Accuracy | 0.001, 0.01, 0.1, 1 ppm, ±0.5% of Full scale reading |
Calibration Points TDS/Conductivity | 4 points |
Temp. Range | -5.0 to 105.0 0 C (23.0 to 221.0 0 F) |
Resolution/Accuracy | 0.10 C (0.1 0 F); ±0.3 0 C(± 0.5 0 F) |
Electrode | Included, 4 cell epoxy body Conductivity electrode, (EC620165) K=1.0, 1 m cable |
Memory/Output | 100 Data sets /RS232 |
Power Requirements | Included, SMPS adapter for 240 VAC,300 mA,12 VDC |