Click Image for Gallery
NE-1000 Single Programmable Syringe Pump
Weight | 3.6 lbs. (1.63 kg) |
Brand | New Era Pump Systems, Inc. |
Number Of Syringes | 1.0 |
Syringe Sizes | Up to 60 mL |
Motor Type | Step Mtor |
Motor Steps Per Revolution | 400 |
Microstepping | 1/8 to 1/2 depending on motor speed |
Advance Per Step | 0.2126 |
Motor To Drive Screw Ratio | 15/28 |
Drive Screw Pitch | 20 Revolutions |
DC Connector | 2.1 mm,center positive |
Voltage At DC Connector | 12V DC at full load |
Amperage | 750 mA at full load |
Power Supply Output Rating | 12V DC @ 800 mA |
Dimensions | 8 3/4" x 5 3/4" x 4 1/2" High (22.86 cm x 14.605 cm x 11.43 cm) |
Allen Wrench | 3/32 Hex |
Model Number | NE-1000 |
Maximum Speed | 5.1005 cm/min |
Maximum Pumping Rate | 1699 mL/hr with a B-D 60 cc syringe |
Maximum Force | 35 lbs. at minimum speed,18 lbs. at maximum speed |
Syringe Inside Diameter Range | 0.100 to 50.00 mm |
Number of Program Phases | 41 |
RS-232 Pump Network | 100 Pumps Maximum |
Minimum Speed | 0.004205 cm/hr |
Minimum Pumping Rate | 0.73 uL/hr with a B-D 1 cc syringe |
Other Details:
- High Pressure Syringe Pump NE-1010
- Continuous Infusion
- Syringe Pump System
- Dual-NE-1000
- Microfluidics Single
- Syringe Pump
- NE-1002X
Features:
Accepts 1 syringe from the smallest size available up to 60 mL. A 140 mL syringe can be filled up to 120 mL. NE-1000 & Dual-NE-1000 pumping rate as low as 0.73 μL/hr with a 1 mL syringe or as high as 35.33 mL/min with a 60 mL syringe. NE-1010 pumping rate as low as 1.459 μL/hr with a 1 mL syringe or as high as 127.2 mL/min with a 60 mL syringe. NE-1002X pumping rate as low as .008 nL/hr with a 0.5 μL syringe or as high as 1555 μL/min with a 60 mL syringe.
- Accuracy :+/-1%
- Reproducibility :+/-0.5%
- Built for Automation
- Operates stand-alone or from a computer
- Infuses and withdraws
- Applications range from simple infusions to complex pumping programs Programmable preset protocols
Program up to 41 pumping phases:
- Change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer.
RS-232 and TTL logic control interfaces:
- Just the features you want…none that you don’t want to pay for” Hold small or big syringes up to 60 mL & partially filled 140 ml.
- One click program uploads from"Pumping Program Generator" spreadsheet.
- Fully programmable; automation capable.
- Set a single pumping rate and/or dispensing volume.
- Power failure mode.
- Display total volume dispensed in mL or µL.
- Precise reproducible flow rates up to 2100 mL/hr.
- Network, control, and monitor up to 100 pumps with one computer.
- C E Certification.
- Easy to use keypad interface – set the syringe diameter, Pumping rate and press start.
- Selectable infusion rates units – mL/hr, µL/hr, mL/min & µL/min.
- Operates from included 12 VDC power Supply.
- Not for clinical use on human.