Click Image for Gallery
LAV LED Type CMD Sensor
Product Details :
Power
source | 100
to 240VAC |
Power
consumption | Projector:
5VA or less, Receiver: 5.5VA or less |
Safety
standard | Class
1(JIS C6802) |
Detecting
distance | 50
m |
Detectable
object | Steel
material with 100 or more(FHM-311) |
Response
time | 30
Sec Or Less |
Operating
mode | Changeover
of DARK-ON/LIGHT-ON |
Control
output | 1C
relay contact |
Analog
output | DC
voltage output in proportion to light-reception amount(Saturated value 9V or
more but do not use |
Connection | Connector
type(Cable 2m) |
Fiber
unit characteristics | Allowable
bending radius: 100mm, Max. pressure: 784MPa, Tension strength: 490N |
Ambient
illuminance | 10,000lux
or less |
Ambient
humidity | 45
to 85%RH(Not icing) |
Other Details:
LAV-10/LAV-11
This is a new optical fi ber type CMD using semi-conductor laser as light source. This equipment is composed of transmitte r(Sensor head, heat-resistance fi ber and amplifier) and receiver and detects steel material which passes through between them. It emits more powerfu lly compared with LED type so that high perfo rmance with margin in bad environment is possible.
·
It
is capable of being used within the scope of 100 to 240VAC.
·
Water-cool
ing or air-purge isn't required fo r sensor head because non- air dust purge
hood is appl ied.
·
8-point
LED display unable to monitor the margin and emitti ng state.
·
Warning
output is provided.
Optical axis adjustmen
Optical
axis adjuster, TES-110 is also available as an option.(Ask us in details) This
is using red laser element(Class 2) and it is easy to adjust optical axis
visually