Horizontal Auto Clave

Construction

The unit has outer chamber, inner chamber, Boiler, Lid and Jacket - all made of AISI 304 grade stainless steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. The unit have a very efficient ms radial locking arrangement, fitted on ms ring, duly chrome plated. It is supplied complete with vaccum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular ms stand. Operatable on single / three phase, 220/440 volts, 50Hz A.C. Supply.

Mode of Heating

• Electrically heated by special flange type / immersion type heaters bearing ISI mark, to work on single / three phase, 220/240 volts, 50Hz, A.C. supply.

Working Pressure

The pressure inside the chamber is variable from 5 psi to 20 psi. But the normal recommended pressure for sterilization process is 1.2 Kgf/cm2 (15 psi).

• Working Temperature : 121 deg.C
• Working Pressure : 1.26 Kgf/cm2 (15 psi)
• Hydro Test Pressure : 2.5 Kgf/cm2 (35 psi)

Working Chamber

Working Chamber

• Semi Automatic Pressure Control Switch.
• Automatic Low Water Cut Off Device
• Mechanical Timer (0-60 Min)
• Mechanical Timer With Alarm System
• Solid State Digital Timer (0-120 Mins)
• Solid State Digital Temperature Indicator.
• Micro-Processor Based Programmable Timer Controller.
• Micro-Processor Based Programmable Timer (0-120)
• Circular Temperature Chart Recorder (24 Hours/Seven Days)
• Strip Chart Recorder
• Digital Pressure Transducer Cum Indicator
• Automatic Pressure And Temperature Mapping System With Validation Soft Ware (Without Pc)

Rubber Gaskets Neoprene rubbler or silicon rubber

Spare Heaters (In-house custom Developed SS Heaters)