Click Image for Gallery
Drop Point Apparatus By Ring & Ball Method
Test Method:
Dropping point determinations are used for identification and quality control purposes, and can be an indication of the highest temperature of utility for some applications. The sample is heated at a prescribed rate in a precision machined cup whose sides slope toward an opening at its center. The temperature at which a liquid drop first falls from the cup is the dropping point of the sample.
Features & benefits
Benefits
Conforms to ASTM D566, D4950; NF T 60-102 and related specifications
Accesssories:
- TEMP. RISE : SETABLE FROM RANGE 0.1DEG C TO 9.9 DEG C.
- METHOD OF DETECTING DROP POINT : MANUAL.
- MICROPROCESSOR BASED TEMPERATURE CONTROL UNIT WITH ALL NECESSARY INTERLOCK.
- YOU CAN SET 10 DEG PRIOR TO EXPECTED DROP POINT. ONCE IT WILL REACH THERE IT WILL GIVE YOU AUDIO VISUAL ALARM AND WILL MAINTAIN THAT TEMPERATURE UNTIL YOU PRESS A RESET BUTTON.( UPTO THIS TIME YOU DON’T HAVE TO ATTEND THE EQUIPMENT.)
- AFTER REACHING PRESET TEMPERATURE, YOU HAVE TO SET RAMP RATE OF TEMPERATURE RISE RANGE FROM 0.1 DEG C TO 9.9 DEG C PER MINUTE. AFTER SETTING THE RAMP RATE, YOU HAVE TO PRESS THE START BUTTON.
- NOW, WHEN YOU DETECT DROP POINT, PRESS HOLD BUTTON THE TEMPERATURE DISPLAY WILL HOLD UNTIL YOU PRESS RESET BUTTON. THE HOLD DISPLAY OF TEMPERATURE INDICATE YOUR DROP POINT.
- HEATING LOAD: 800 WATT.
- POWER SUPPLY: 230V AC, 50 HZ, 10 AMP.
- STIRRER: MOTORISED.
- ILLUMINATION: BRIGHT LED TYPE.
SAFETY FEATURES:
- OVER TEMPERATURE PROTECTION.
- OVER LOAD PROTECTION.
- SHORT CIRCUIT PROTECTION.
- INPUT POWER FLUCTUATION PROTECTION.
- Maximum Temperature:
- 550°F (288°C)
Bath Medium:
A high temperature heat transfer fluid having a flash point in excess of 400°C is recommended. Silicone fluid (P/N 355-001-002) is suitable.
Electrical Connection :
230V 50/60Hz, Single Phase, 6.5A
Included Accessories :
- Grease Cup, chromium plated brass
- Test Tube with indentations
- Cork Ring Guide
- Thermometer Corks (2)
Polished Metal Rod.
Dimensions in inches :
6” X6” X31”
Nett Weight : 6.5 Kg
Shipping Information :
Shipping Weight : 8.5 Kg
Dimensions : 2.8 cu ft
Ordering Information:
CATALOGUE NO | PRODUCT DESCRIPTION | ELECTRICAL REQUIREMENT |
---|---|---|
HAMCO 54B | SEMIAUTOMATIC DROP POINT OF GREASE TEST APPARATUS | 220-240V, 50/60Hz, 10.8 AMP |
HAMCO 54B EXP | SEMIAUTOMATIC DROP POINT OF GREASE TEST APPARATUS | 115V, 50/60Hz,20.8 AMP |