Our website uses cookies. They help us understand how customers use our website so we can give you the best experience possible. By continuing to browse this site or choosing to close this message, you give consent for cookies to be used. The cookies are not used for advertising. This applies to visitors from EU.
Programmable Amp Hour Meter
Click Image for Gallery
Programmable Amp Hour Meter
Programmable Amp Hour Meter
Product Details:
Features
  • Current Integrated Display
  • 4 DIG AMP-HOUR (Selectable: AH , 0.1 AH, AMin & 0.1 AMin)
  • Presetable Limit for Amp-Hour with Relay Out,
  • 6 Digit Totalizer AH Stored in EEPROM & Front Resettable
  • Displays Current in Amps
  • Lockable Scale Factor -CAL- for Various Shunts
  • Signal Input in mV from Current Shunt of 75mV/Amp
  • Application in Constant Thickness Electroplating which is Proportional to Preset AH Limit, irrespective of Voltage/ Current Variation.
  • Simultaneous Input for mV(from Current Shunt) and Battery Voltage, to measure the AH of a chargeable Battery when Voltage falls to Factory-Settable Limit( usually 10.5V for 12V Batt)

Specification

Display
6 RED 7 Segment LEDs of 0.56” character height.
Current Display
Max 9999 Amps using a shunt of current/75mV. User programmed
Amp-Hour
Max 9999 A-H for each preset cycle. (Amp-Hour range is selected by shorting Pin 17-18 at the rear)
Amp-Minute
Max 9999 A-Min for each preset cycle. (Amp-Minute is selected, opening the link between Pin 17 & 18).
Max shunt
Max value of 9999 Amp corresponding to 75mV
Totaliser
6 Digits for Amp-Hour or Amp-Min. i.e. 99,99,99. (readable for 10 sec by going into ‘total’ mode).
Limit
Up to 9999 AH or Amin. setting (In limit mode using incr./ decr. switches).
Relay Contact
One NO-P-NC of 5 Amp rating.
Trigger start
By pressing front panel switch or closing a rear external contact.
Battery Back-Up
Not required. Programmed values & readings, including A-H stored in EPROM.
Lock
Electronic lock for calibration (open link between Pin 1 & 2 to lock CAL)
Low Volt. Trigger
Set at 10.5V internally. For testing 12V Battery AH. (With Pin 3 & 4 shorted).
Increased Res.
0.1AH or 0.1AMin facility by shifting internal jumper.
Supply
220V AC  10%
Size
Front Fascia 96mm x 96mm Din Size. Depth 135mm. Cut Out : 91mm x 91mm.
Weight
800 grams

Write a review

Note: HTML is not translated!
    Bad           Good

Programmable Amp Hour Meter

  • ₹0
Add to Wish List Compare this Product

0 reviews / Write a review

Seller information

View profile
Please sign in to contact Cryocell India Pvt. Ltd.

Tags: Digital multimeter