Environmental Test Chamber 
Product Details:
The Purpose of Environmental Test Chamber Manufacturer in India is to provide evidence on the how the quality of drug substances or drug product varies with time under the influence of environmental factors such as temperature, humidity, and light and to establish a re-test period for the drug substance or product under recommended storage conditions. Hence Environmental chamber serves as an important quality attribute of the product.
HAMCO Make GMP photostability test chambers are specially built to Pass FDA and ICH Q1B compliance standards and have a reputation for reliability, quality, and performance. Exceed FDA/ICH guidelines for long-term, intermediate, and accelerated stability studies.
State of the art environmental chambers are available. This chamber has the capability to provide fluorescent light intensities from 1,000 to 10,000 Lux hours. Samples stored at 10,000 Lux can satisfy the ICH guidelines for light exposure in as little as five days. The UV study is done simultaneously. Separate switches are provided for incandescent & UV light sources.
Specification 

• Temperature Range 5.0 °C to 60.0 °C. Accuracy +/- 0.1 °C. Uniformity +/- 1.0 °C
•  Humidity range: 25% to 95% RH, Accuracy +/- 3% RH, Uniformity +/- 3% RH.
  
•  Lamp type: Florescent.
•  UVA Intensities: 1.8 W/m² (requires about 111 hrs. achieving ICH recommendation of 200W-hr/m²)
  
•  VIS Intensities: 12 Klux (requires about 100 hrs. achieving ICH recommendation of 1.2 million lux-hr)
•  Temperature Display : Digital LED 3 ½ digit, Resolution 0.1 deg C
  
•  Humidity Display: Digital LED 3 ½ digit, Resolution 1% RH.
•  Heating system: U shaped Nichrome wire heater in SS Sheathing.
  
•  Cooling system: Hermetically sealed CFC free Emerson compressor with R 134a refrigerant .
•  Humidity system: Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
  
•  Air circulation: Flange Motor with Impeller and blower.
•  Interior Illumination for working Area.
•  There will be two nos of blower from 450 Ltr Onwords.
  

Construction

•  Double walled, gap between walls filled with PUF Insulation.
•  Standard Model: Stainless steel Mirror polished chamber and heavy gauge Powder- coated CRC exterior.
  
•  GMP Model: Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.
•  Double door: Inner full Viewing door and outer door insulated with lock and key arrangement.
  
•  50mm Validation Port with silicone rubber seal to insert sensor for validation purpose.
•  3” Thick CFC Free Puff Insulation.
  
•  Stainless steel Trays. Adjustable Tray Height adjustment.
•  Unit Mounted on castor wheels with front lock arrangement.