ATMOSPHERIC CORROSIVITY MONITOR
Product Details:
Bry-Air is proud to introduce yet another revolutionizing product, Atmospheric Corrosivity Monitor (ACM), which will enable measure corrosion potential of an enclosed environment with ease and accuracy.
Bry-Air Atmospheric Corrosivity Monitor (ACM) monitors corrosion potential on a real time basis. It measures and monitors the room temperature, relative humidity and optionally, the differential pressure. It provides qualitative and quantitative details of the overall corrosion potential of an environment (room) through copper and silver sensors. It is based on Quartz Crystal Microbalance (QCM) technology, which measures the rate of increase of corroded metal sensors mass. The measurements are extrapolated in 24 hours for 30 days to know the severity level as per ISA standard.
Bry-Air Atmospheric Corrosivity Monitor (ACM) diagnoses the corrosion of an environment according to the ISA Standard 71.04-2013 outlining severity of corrosion from G1 (mild) to GX (severe) environment. Reactivity monitoring can be used to characterise the destructive potential of an environment. Measurement of thickness of corrosion film provides an excellent indication of the type(s) and level(s) of all corrosive gases present in the local environment.
Why do we need to measure atmospheric corrosion and reactivity rate?
Often it is seen that the environmental threats posed by fire, power, temperature, humidity and airborne particulates have long been recognized and successfully addressed in the server-room environment, the corrosive potential of the air has been largely ignored.  Even extremely low levels of contaminant gases at the ppb level corrode and damage the sensitive electronic cards in your servers. Excessive corrosion often leads to electronics warranty non-compliance, circuit board failure, ghost signaling, and even complete failure of electronics components.
Environment with higher atmospheric and air contamination require greater attention to air quality management. The interactive result of temperature variations and humidity with the gaseous contaminants has the potential to increase the threat of air corrosion, providing greater reasons for close monitoring of the immediate environment of IT infrastructure. All companies dealing with sensitive IT infrastructure such as data centers, server room, control rooms, as a core part of its operations, need to implement a comprehensive checking and monitoring mechanism for the corrosion potential of the gases inside their facility. The ISA standards define or characterize environments in terms of their overall corrosion potential.