Specifications:

• This is triple walled incubator. 
• Outer wall made of mild steel powder coated; middle wall & inside wall shall be made of stainless steel 304 qlty. 
• There shall be mineral wool insulation of 50mm between mild steel and second wall of water jacket provides stable temperature uniformity. 
• Microprocessor control allows to set temp. from 5 deg.c above ambient to 70 deg.c and read out to 0.1 deg.c calibration having PID with 4 ramp & 4 soaks.
•  Full length toughened glass inside permits visual checks without disturbing thermal condition.  Door and water jacket design eliminate condensation on the incubator walls.
•  Heating elements are made of copper pipe in water jacket inhibits bacteria growth.
• Adjustable leveling feet compensate for uneven surface.
• Incubator shall be supplied with 3 nos. shelves for having 6 nos. shelves positions to work on 200-220 V AC. 50 Hz.

Size Inside Chamber: W 470 x D 470 x H 600mm