Laboratory Autoclaves
Product Details:
TM-225 PORTABLE
Laboratory AutoClaves : Made of S.S or aluminum vertical having no joints. Pressure range 15psi to 18psi. Domed cover can be sealed by a joint less gasket
which is clamped to the vessel by wing nuts by hinged bolts which engage slotted lugs on rim of the cover. Provided with dial pressure gauge. Spring loaded safety value have threaded cap for pressure adjustments.
Models:
(Dia x Height in mms)
a) 300x300 mms

TM-226 VERTICAL
Laboratory AutoClaves: Double wall construction with boiler & steam jacked made of thick S.S. The outer wall is made out of thick m.s sheet. The lid is made of thick
S.S plate (Joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging
slotted lugs on rim of the cover.
Provided with dia pressure gauge, air/s team realese cock, spring loaded safety value adjustable to any required point from 10psi to 20psi with
accuracy ±3psi.
Model:
a) 250x450 mms
b) 300x500 mms
c) 400x600 mms
d) 450x600 mms
e) 550x750 mms
Options:
i) Automatic low water level cut of device
ii) Pressure control switches
iii) Dressing bins of carious sizes.
iv) Water level arrangement

TM-227 HORIZONTAL
Laboratory AutoClaves: Specifications as in vertical model but presented in a horizontal position and without steam jacket. The outer body made of m.s sheet, inner chamber made of S.S sheet.
Model:
a) 350x550 mms
b) 450x600 mms
c) 550x750 mms
d) 400x1100 mms
Options:
i) Pressure gauges
ii) Pressure control switches
iii) Automatic low water level cut off device