Digital Flame Photometer

Product Details:

Product Type	Microcontroller Based / Microprocessor Based
I Deal In	New Only
Brand	Globe Scientific Instruments
Model Name/Number	1600-G
Resolution	0.1 ppm / 0.1 meq.
Detector	Silicon Photodiode
Reproducibility	< 1% coefficient of variation for 20 consecutive samples using 10 ppm Na set as Maximum Standard
Power	230V AC, 50 Hz
Displayed Resolution	128x64 Graphical LCD with Backlit
Mode	General/Serum/Urine
Ignition System	Auto Ignition
Weight	6.25 kg
Gas Control	Controlled by Precision Regulator
Fuel Type	LPG
Flame System	LPG and Dry Oil Free Air
Determination	General/Serum/Urine
Usage/ Application	Forensic, Diary, Cement , Water, Food/Fruits, Biological, Serum and Urine, Soil Applications
Curve Accuracy	< 2% of FS
Calibration	Upto 5 Point Calibration
Atomizer	Axial Flow Type
Wavelength Range	0-100 ppm and upto 250 meq/l
Filters	Narrow Bandwidth interference glass filters (Calcium and Lithium at extra cost)
Country of Origin	Made in India

Globe Scientific Instruments Microprocessor Flame Photometers 1600-G comes with Flame Failure detection and Auto Gas Cutoff Facility. In case of power failure, the gas cuts off automatically. In case the flame goes off accidently during work, the flame failure alarm sounds after a few seconds.Microprocessor Flame Photometer 1600-G are used for the determination of Sodium, Potassium, Calcium, Lithium & Barium. They use the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. They have soft touch membrane keys for ease of operation. The solution is aspirated through an atomizer. Air, sample and the fuel are mixed in the mixing chamber which is then sprayed as a very fine mist into the flame. Radiations from the flame passes through specific narrow band interference filter and pass to the photo-detector. The final results are displayed on the 128 x 64 alphanumeric LCD. The standard model comes with 2 filters (Na, K). Additional filters Ca & Li are optional at extra cost.A photoelectric flame photometer is a device used in inorganic chemical analysis to determine the concentration of certain metal ions.