Click Image for Gallery
The Triaxial shear test apparatus shall confirm with the requirements of IS: 2720 (Part 11) and (Part 12) and are made from corrosion resistant material.The Triaxial compression test, is used to simulate all combinations of practical stress and strain conditions, occupies at present a fairly dominant position in soil testing.
Features:-
- Load Frame
- Mototrized
- 12 speeds
- 50 Kn ( 5,000 kgf ):-(IS:2720(Part 11) and (Part 12)
Load frame consist following features:
- Two pillar type
- Detachable Frame
- Enclosed Motor and Gear system
- Jewel Lamps Indicating direction of motion
- speed chart, operational ease
- useful for both Triaxial and CBR Tests.
- The Load Frame consist of a cabinet which can house the gear system and motor with sturdy angle iron frame
- The loading is done through the bottom loading platen, which is carried on a lead screw, which advances upwards
- The top load bracket, which slides over two upright pillars, can be made positioned at any desired height and should be lockable
- It should carry a screw adapter for standard proving rings. The loading part of the unit should be detachable from the main unit for ease of transport and to avoid damage to the tension rods
- Load frame should having following strain rates: 12 speeds (between 0.0064 mm / min and 1.25 mm/min.)It should be suitable for operation on 220 V, 50 Hz, single phase, AC supply.
Triaxial Cells (38mm and 50mm dia):-
All parts are made from corrosion resistant material. Particular attention is paid to the quality of the finish between the stainless steel plunger and the bushing. The cell cylinders are made from acrylic plastic material and those for use up to 20 Bar (20 kg/cm2) are usually reinforced by bands. Each cell has four take-off positions, drilled in the base, for Cell pressure, Pore water pressure, Drainage or back pressure. All valves are of no-volume change type.
Pore Pressure Apparatus:-
This pore pressure measuring apparatus consists of a screw pressure pump, null indicator in perspex, pressure gauge, mercury manometer, volume change burette and the necessary connecting tubes and valves. It is used for measuring pore water pressure and pore air pressure in soils.
It shall consist following accessories:
- Pressure Gauge: Bourdon Tube Type- 1000 kPa (10 kg/cm2 ) capacity, Graduation : -1.0 To +10 bar in 0.1 bar division (.1 to 10 kg/cm2) divisions) Dia : 200 mm
- Manometer: Glass U-Tube, measures low positive and negative pore pressure and helps To check zero error of pressure gauge. It is provided with a mercury trap. (Mercury is Supplied at extra cost)
- Mercury: for filling manometer tubes and null indicator
Digital Data Logger Specification:-
- Beautifully designed big L.C.D. displayed with floracent lighted Digital Data logger for all parameter reading and Data Analyzing. With real time measurement .
- You can see all parameters (1) load, (2) Displacement- constant speed, (3) constant spressure , (4) pore pressure, at a time on screen during the test.
- All parameters duly calibrated by standard instruments.
Standard accessories are used as :-
- LVDT Displacement Sensor, 0.01 mm x 25 mm travel.
- Two different capacities Load Cells for two different Load Measurement. One of 25 kn and other of 50 kn as per sample selection.
- Two nos. Pressure Cells (1) POR Pressure and (2) Constant Pressure Measurement up to 10kg/cm² are used .
- User Friendly Software with Load V/S. Time , Load V/S. Displacement, Displacement V/S. Time. Etc.
- ……and more as per customized.
Digital Triaxial Test Apparatus with Data Logger
- Views: 777
-
K J Enterprise - Vendor Type: Manufacturer, Supplier
- Product Code: KJE0000029
- Availability: In Stock
- ₹0
