Click Image for Gallery
Alcolyzer Spirits M/ME - Alcohol Analysis System
- Direct, selective alcohol determination for fast and reliable results
- Other sample constituents in spirits have no influence on the alcohol analysis
- Product-independent adjustment with water and one binary solution only
- Modular setup for efficient multiparameter analysis
Analyze spirits efficiently and economically in the laboratory and at the production line using the Alcolyzer Spirits M/ME alcohol analysis system. Alcolyzer Spirits M/ME determines the alcohol content (35 to 65 %vol), color, and pH value of alcoholic beverages. In combination with a density meter, the system additionally determines the total extract of the sample.
Expanding the system with an MCP 100 circular polarimeter enables the direct alcohol analysis in saccharose or invert sugar based liqueurs in the range of 15 to 40 %vol.
Key Features :
Alcohol analysis system with selective alcohol determination
- Highly accurate measurement of the alcohol content of your spirits in the concentration range 35 to 65 %vol
- Determination of the alcohol content of liqueurs in the concentration range of 15–40 %vol (in combination with MCP 100 circular polarimeter only)
- Optional pH, color and turbidity measurement
- For spirits such as whisky, cognac, brandy, vodka, gin, tequila and rum
- For liqueurs based on saccharose or invert sugar
Time-saving and user-friendly
- Only 3 to 4 minutes from filling to the result
- Accurate, fully automatic thermostatting via an integrated solid-state thermostat
Rapid and easy adjustment
- Adjustment/calibration with water and an alcohol/water solution
- One single adjustment is valid for all your samples
10.4" touchscreen
- Applies state-of-the-art PCAP technology
- Provides a premium user experience
Technical specifications
Available methods | |||
---|---|---|---|
Whisky | For spirits with an extract content up to 5 g/L (e.g. whisky, vodka, gin, tequila and rum) | ||
Cognac | For spirits with an extract content up to 20 g/L (e.g. cognac and brandy) | ||
Liqueur (in combination with MCP 100 only) | For liqueurs with an extract content higher than 20 g/L | ||
Measuring range | |||
Alcohol | 35 to 65 %vol (for spirits) 15 to 40 %vol (for liqueurs, in combination with MCP 100 only) (data can be displayed from 0 to 90 %vol) | ||
pH value (optional) | 0 to 14 | ||
Color (optional) | 0 to 120 EBC | ||
Density (optional) | 0 to 3 g/cm3 | ||
Turbidity (optional) | 0 to 100 EBC | ||
Repeatability - standard deviation | |||
Alcohol | 0.01 %vol | ||
pH value (optional) | 0.02 | ||
Color (optional) | 0.1 EBC | ||
Density (optional) | 0.00001 g/cm3 (DMA 4500) or 0.000001 g/cm3 (DMA 5000) | ||
Turbidity(optional) | 0.02 EBC | ||
Additional information | |||
Interfaces (Master instrument) | 4x USB (for USB flash drive, keyboard, mouse, barcode reader or printer), Ethernet (LAN), RS-232, CAN | ||
Interfaces (Module) | CAN | ||
Sample volume | 35 mL per measurement | ||
Typical measuring time per sample | 4 minutes (incl. filling) | ||
Sample throughput | 15 samples per hour |