Click Image for Gallery
Wine Analysis System:
Alcolyzer Wine M/ME
- Selective alcohol determination uninfluenced by other ingredients
- Measure the alcohol content of wine, sparkling wine, cider, and sake in less than three minutes
- Obtain highly accurate results, independent of type and vintage
- Minimum sample preparation and short measuring cycles
Use the Alcolyzer Wine M/ME wine analysis system to determine the alcohol content of your wine quickly and easily. When combined with a density meter, Alcolyzer Wine M/ME determines further parameters in a single cycle, e.g. extract content. The measuring method for selective alcohol determination eliminates the influence of other sample constituents on the alcohol measurement and therefore guarantees highly precise results.
Key Features :
Efficient and high-performance wine analysis
- Measure the alcohol content of wine, sparkling wine, cider and sake from 0 to 20 %v/v
- Other wine constituents have no influence on the alcohol analysis
- Fill the measuring cell via syringe, peristaltic pump or automatic sample changer
- Low sample volume, high sample throughput
- Optional pH and turbidity measurement
Save time in the lab
- Minimum sample preparation
- Short measuring cycles
- No cleaning between samples
Universal adjustment saves you time
- Adjustment/calibration with water and an alcohol/water solution
- One single adjustment is valid for all your samples
10.4" touchscreen
- Applies state-of-the-art PCAP technology
- Provides a premium user experience
Technical specifications :
Measuring range | 0 to 20 %v/v |
---|---|
Repeatability s.d. | ±0.01 %v/v alcohol |
Temperature control | Built-in solid-state thermostat (Peltier) |
Temperature repeatability | ±0.01 °C |
Minimum amount of sample | 3 mL |
Typical measuring time per sample | 2 minutes |
Sample throughput | 10 to 30 per hour |
Interfaces (Master instrument) | 4x USB (for USB flash drive, keyboard, mouse, barcode reader or printer), Ethernet (LAN), RS-232, CAN |
Interfaces (Module) | CAN |