Our website uses cookies. They help us understand how customers use our website so we can give you the best experience possible. By continuing to browse this site or choosing to close this message, you give consent for cookies to be used. The cookies are not used for advertising. This applies to visitors from EU.
Inline Density Meter

Inline Density Meter:

L-Dens-7000-series

  • Concentration measurement with process density meters
  • Low operating costs: Maintenance-free, no consumables required
  • Easy to integrate with minimal engineering efforts and cost
  • Models available for hazardous areas and hygienic applications
  • Comprehensive database for concentration formulas available

The L-Dens 7000 series – Anton Paar’s process density sensors with a tube size of 6.3 mm (inner diameter) – is a result of more than 35 years of essential practical experience. This all-in-one solution combines the highest accuracy, compact and robust design, and easy integration, which makes it best-in-class for precise concentration measurement. There are two types: 4-digit accuracy L-Dens 7300 Petro and L-Dens 7400, and 5-digit accuracy L-Dens 7500. Density values are directly calculated by the sensor electronics.

The design of the oscillating U-tube follows the requirements of hygienic applications. The density sensors have one-piece oscillating tubes (L-Dens 7300 Petro and L-Dens 7400: U-shaped tube; L-Dens 7500: W-shaped tube). The L-Dens 7000 series uses digital signal processing and can be equipped with the new Pico 3000 transmitter and Pico 3000 HMI.


Key Features

Highest precision – reliable measurement under changing process conditions

The L-Dens 7000 density sensor series measures with the highest precision and an outstanding accuracy of up to 5 x 10-5 g/cm³.

The L-Dens 7000 series provides:

  • Powerful digital signal processing
  • Integrated high-precision temperature sensors
  • A hermetically sealed U-tube to withstand humidity condensations

The highest accuracy in temperature and optional pressure measurement is the basis for compensating unstable process conditions. Thus, changing process and environmental conditions have a negligible effect on the measurement. This keeps the production flexible to react to market or consumer demands.


Minimized integration efforts and costs

The question of where and how an instrument can be integrated into a system is essential with regard to minimizing engineering efforts and costs. Being very compact und modular, sensors of the L-Dens 7000 series can even be mounted in the tightest spaces and meet the most demanding system requirements.

The L-Dens 7000 density sensor series with its wetted parts and adapters is prepared for:

  • The petroleum, chemical, pharmaceutical, ethanol, or beverage industry
  • Hazardous areas
  • Hygienic applications
  • Withstanding extremely aggressive chemicals
  • Full flow, inline, bypass, or tank installation


The simple operating concept with Pico 3000 saves your time and training expenses

The new generation of L-Dens 7000 density sensors comes with the new transmitter Pico 3000. You will benefit from the flexibility and modularity with respect to operation and data communication.

  • New Pico 3000 transmitter integrated at the sensor or as a separate remote control unit
  • Human machine interface Pico 3000 HMI
  • Unified electronics housing concept for non-Ex and Ex versions
  • Common industrial fieldbus standards supported: Modbus RTU, HART, PROFIBUS DP, PROFINET IO
  • Backup and restore function
  • Data and error log function
  • USB interface at the electronics housing for configuration with a laptop


Immediate start-up and operation

The sensors work without time-consuming commissioning and on-site adjustments. Pre-configured in the factory, they come with the right sensor setup and application formulas.

  • Configured and adjusted in the factory
  • Application formulas integrated
  • Quick start-up and commissioning


Operating costs at a minimum

The L-Dens 7000 sensor series does not require any maintenance. You can install the sensor and simply rely on measurements with the highest accuracy for decades.

  • Maintenance-free
  • Stainless steel housing for non-Ex versions
  • No consumables


Technical specifications :

L-Dens 7300 PetroL-Dens 7400L-Dens 7500
Process densitymax. 1500 kg/km³max. 3000 kg/m 3max. 2000 kg/m 3
Standard adjustment
range
600 kg/m 3 to 1200 kg/m 3
Material of the wetted
parts
Stainless steel 1.4404 (316L)Stainless Steel
1.4404 (316L)
Hastelloy C-276
Incoloy 825
Tantalum
Hastelloy C-276
Accuracy in adjusted range:
Repeatability

Density Measurement

Temperature
0.2 kg/m3
(2 x 10-4 g/cm3)*

0.5 kg/m3
(5 x 10-4 g/cm3)**

0.1 °C

0.02 kg/m 3
(2 x 10-5 g/cm3)*

0.1 kg/m3
(1 x 10-4 g/cm3)**

0.1 °C

0.01 kg/m3
(1 x 10-5 g/cm3)

0.05 kg/m3
(5 x 10-5 g/cm3)

0.1 °C
Process temperature-40°C to 125 °C
CIP/SIP temperature and duration145 °C for max. 30 min.
Ambient temperature
(for non Ex versions)
-40 °C to 70 °C without Pico 3000

-40 °C to 70 °C* with Pico 3000

-20 °C to 60 °C with Pico 3000 and Pico HMI
 *) Pico 3000 Version PROFINET IO, EtherneNet/IP, Modbus TCP: max. 60 °C
Process pressure absolutemax. 50 barmax. 50 bar

High-pressure version
(only available in Hastelloy C-276):
max. 180 bar @ Tprocess ≤ 70 °C,
max. 140 bar @ Tprocess ≤145 °C,
CRN max. 170 bar
max. 50 bar
Recommended flow rate100 L/h to 500 L/h
CommunicationPico 3000:
  • Analog
  • HART
  • Modbus RTU
  • PROFIBUS DP
  • PROFINET IO
  • Frequency

mPDS 5:
  • PROFIBUS DP
  • PROFINET IO
  • Devicenet
  • Ethernet/IP
  • Modbus TCP
  • I/O Board
 
Process connectionsOptions for integration:
  • Full flow
  • Bypass
  • Inline

Flange:
  • DIN/EN
  • ANSI
  • Tri-Clamp
  • Varivent® N

Tube end:
  • OD: 12 mm, OD: 1/4”

Thread:
  • G 3/8”

Others on request
Dimensions:
Non-Ex version (L x W x H)
Ex version (L x W x H)

-
245 mm x 160 mm x 205 mm

245 mm x 145 mm x 185 mm
245 mm x 160 mm x 205 mm

190 mm x 145 mm x 185 mm
190 mm x 160 mm x 205 mm

Explosion-proof versions according to ATEX / IECEx / FM / UL / CSA
* Tantalum 0.05 kg/m3 (5 x 10-5 g/cm3)
** Tantalum 0.5 kg/m3 (5 x 10-4 g/cm3)

Write a review

Note: HTML is not translated!
    Bad           Good

Inline Density Meter

  • ₹0

Seller information

View profile
Please sign in to contact Anton Paar India Pvt. Ltd.

Tags: Density Meter