Click Image for Gallery
Automatic Bomb Calorimeter
Product Details:
Test Method :- determines the gross Calorfic value of any solid or liquid sample by determining the water equivalent by burning 1 gm of known CV sample.
Standard :- confirm to the specification ASTM D 4809, D 240, DE711, IS -1350- 1966, BS 1016 PART 5-1967, IP 12/63 T.
Features & benefits :-
Type of method: – isothermal.
Method of detecting temp. Rise : automatic.
Method of detecting calorific value : automatic.
Touch Screen PLC.
Automatic measurement and calculation of Calorfic value / water equivalent.
21 x 4 character lcd display
Thermal printer interface with printout report.
Auto alarm on completion of test.
Pc interface for data recording.
Weight of the sample to be filled by keyboard.
Calorimeter vessel made of SS
Bomb support to ensure correct positioning of bomb in vessel.
Ambient working temp range : 15 to 35 degree c
Heat capacity :- 5800 to 6500 cal/deg c
Process time: – 10 to 12 minute
Temperature resolution :- 0.001 deg c
Oxygen bomb endure pressure : 300 kg/cm
Humidity requirement : less than 85%
Power supply: 230a VC, 50 Hz, 10 amp
Heating load: 2 kW.
Control panel/display :
a. Digital display of temperature.
b. Auto temp. Rise detection based on microprocessor chip based. User has to press one button and is free for doing other thing while microprocessor will take reading automatically.
c. Automatic reading for temp. Rise calculation.
d. All the necessary interlock for stirrer, ignition wire continuity, wire loose, over load etc.
e. Electrode short indication.
f. Continuity test indication.
g. Auto stop of the stirrer after completion of test.
h. Buzzer horn after completion of the test.
Safety interlocks/ relay :-
a. Over load protection.
b. Electrode short protection & indication.
c. 1-phase indication lamp.
d. Emergency switch off
Construction
a. Double walled construction, thermally insulated by pouring approx. 18 ltr water in the outer jacket.
b. Made of full stainless steel.
Accessories will be supplied with equipment:
SS bomb (cat no : hamco 6ac 1)
Calorimeter vessel with bomb support.
Insulated outer jacket with calorimeter vessel support.
Combined lid for outer jacket & calorimeter vessel.
Connecting tubes (copper / flexible) for filling oxygen in the bomb: 3 nos.
Spanner for oxygen valve & copper tube connection.
Oxygen control valve. (cat no : hamco 6ac 2)
Pressure gauge on stand with bomb lid stand.
Safety device.
Pellet press. (cat no : hamco 6ac 3)
Stirrer unit
Automatic electronic firing unit with digital Beckmann thermometer. (microprocessor based)
Connecting wire [electrical].
Hook for lifting bomb. (cat no : hamco 6ac 4)
Crucible. [stainless steel] (cat no : hamco 6ac 5)
Cotton reel(cat no : hamco 6ac 6):01 no. (approximately 200 meters)
Bomb o ring (cat no: hamco 6ac 7): 01 no.
Teflon tape: 01 no.
Valve body o ring (cat no: hamco 6ac 8): 01 no.
Ignition wire (cat no: hamco 6ac 9): 100 meters.
Schrader valve (cat no: hamco 6ac 10): 01 nos.
Bursting discs for safety device 12 nos: 1 set. (cat no : hamco 6ac 11)
Benzoic acid of known calorific valve. { 6319 cal / gram }
Valve key. {4 sided key used for replacing/tightening Schrader valve, see (p) in precautions on page 12}
Printer
Pc interface cable
Operating manual
Spares required for 5 year trouble free operation:
Cotton reel (cat no: hamco 6ac 6):05 no. (approximately 200 meters)
Bomb o ring (cat no: hamco 6ac 7): 02 no.
Valve body o ring (cat no: hamco 6ac 8): 02 no.
Ignition wire (cat no: hamco 6ac 9): 100 meters.
Schrader valve (cat no: hamco 6ac 10): 01 nos.
Electrical requirement :
220-240v, 50/60hz, single phase, 10.9a
Or 115v, 50/60hz, single phase, 20.8a
Dimension: – ixwxh,in.(cm) :
16×21.5×14.5 (41x55x37)
Net weight: 64 lbs (29kg)
Shipping information:
Catalogue No | Product Description | Electrical Requirement |
---|---|---|
Hamco 6E | Semiautomatic bomb calorimeter without printer | 220-240v, 50/60hz |
Hamco 6Eexp | Semiautomatic bomb calorimeter without printer | 115v, 50/60hz |
Hamco 6ac1 | SS bomb | |
Hamco 6ac2 | Oxygen control valve | |
Hamco 6ac3 | Pellet press | |
Hamco 6ac4 | Hook for lifting bomb | |
Hamco 6ac5 | Crucible | |
Hamco 6ac6 | Cotton reel | |
Hamco 6ac7 | Bomb o ring | |
Hamco 6ac8 | Valve body o ring | |
Hamco 6ac9 | Ignition wire | |
Hamco 6ac10 | Schrader valve | |
Hamco 6ac11 | Bursting disc |