Click Image for Gallery
Autoclave Controller with PID/ON-OFF Control
Product Details :
Usage/Application | Sterlizing process |
Voltage | 100 - 240 vac |
Power | 100 to 240 VAC |
Control Type | High Limit |
Type | Digital |
Brand | wave |
- Size 48(w)x48(h)x85(d)mm (Model - WTC-2301-ACC)
- Size 72(w)x72(h)x110(d)mm (Model - WTC-2101-ACC)
- Size 96(w)x48(h)x110(d)mm (Model - WTC-2001-ACC)
- Size 96(w)x96(h)x85(d)mm (Model - WTC-2201-ACC)
- icrocontroller based,
- Four-digit dual display
- Supply 100-260 VAC
- Input PT100 RTD
- Output ( 1) Heater SSR, (2) Valve Relay, (3)Alarm Buzzer
- Control action Heating control-PID (Auto tune) and ON/OFF selection
- Range 0 to 400.0 DegreeC
- Accuracy of 0.5% of full scale
- Pressure display if Pres is Enable.
- Set Heater temperature setting as per range adjustable in set mode.
- Valve temperature (Purg) setting as per range adjustable.
- Hysteresis 0.2 to 25.0c adjustable.
- Valve open time (E.on) 1 to 60 sec adjustable.
- Valve Close time (E.off) 1 to 60 sec adjustable.
- Ct 1 to 60 seconds for SSR output adjustable
- Auto-tuning require for PB, It & dt value
- Hysteresis 0.2 to 25.0 DegreeC adjustable
- OPEn display if Sensor break
- Relay trip if sensor breaks or connection open
- Calibration Error correction by a front key switch (No preset setting)
- Configure link @ Back terminal to avoid unauthentic entry.
- Alarm Mute by decrement key.
- RS485 Output Optional
Additional Information:
- Item Code: WTC-2XXX-ACC