DRY HEAT STERILIZER

Product Details :

DRY HEAT STERILIZATION AND DEPYROGENATION

Dry heat sterilization and depyrogenation are used for complete destruction & removal of all micro-organisms by means of dry heat. These stainless steel dry heat sterilizers use air as a medium of sterilization.

OPERATING TEMPERATURE :

It employs higher temperatures up to 300°C and requires exposure time up to 2 hours, depending upon the temperature employed.

APPLICATIONS :

• Glass Bottles, Vials, Ampoules, Containers
• Stainless steel and aluminium containers
• Powders like sulphonamides and talcum powder

OPERATION :

• Load is arranged to ensure uninterrupted air flow.
• DHS may be pre- heated for materials with poor heat conductivity.
• The temperature is allowed to reduce up to 55°C-60C prior to removal of sterilized material.

DESIGN AND FUNCTIONAL FEATURES :

• Chamber is manufactured in SS316L. Fully welded with round corners.
• The doors are of hinged type, equipped with double edge seal gasket for maximum safety
• For operation, control and data acquisition a PLC is provided. HMI facilitates interface between operator and equipment.
• Equipment are available with single door as well as double door pass through arrangement.
• Bio seal flange to seal the equipment into the building wall can be provided
• HEPA filters are installed in the fresh air, recirculation and exhaust module. In addition, 0.5 micron “Micro B” filter is installed as a pre-filter to the Fresh Air HEPA
• Three modules for air handling
• Fresh air (air intake)
• Recirculation
• Exhaust

CONTROL SYSTEM :

Control Systems are available with Siemens, Allen-Bradley & Mitsubishi PLC. The control system design enables an easy & logical operation with graphical user interface, menu driven display & passwords at several levels. PC & Printer can be connected directly to the control system.

ACCESSORIES :

• A complete range of carriages, transfer trolleys to simplify handling.
• Plates, trays, wire baskets and other relevant accessories are supplied depending on the application.