Chrom Lite 3000A

Gas Chromatograph

Product Details :

Compact product with 4 channel EPPCs with a double door over, Gas Saver, Constant flow & Constant pressure models. 

• Advance electronics architecture based on latest micro controllers.
• Up to 4 Channel Programmable Pressure Controllers(PPCs), each allowing accurate and precise electronic pressure regulation for carrier Gas and Split settings.
• Heated Zones: 5 Independent Heated Zones up to 500 °C for individual control of Injectors, detectors, oven
• No. of ramps: 10 with maximum temprature ramp of 50°C per minute
• Carrier flow in constant flow or constant pressure mode
• Sensitivity of FIDs equivalent to 3 pg C/sec of Dodecane or less using Dodecane as a test substance.
• Industries Covered - Agriculture, Chemical, Environment, Petrochemical, Pharmaceutical, Research

Product Features :

• At par in performance and economical with advanced electronic architecture based on latest micro controllers.
• Upto 4 Channel Programmable Pressure Controllers, each allowing accurate and precise electronic pressure regulation for carrier gas and Split settings.
• Designed for  high  level application  in Pharma, Oil & Gas, Environmental, Agriculture, and Research etc.
• Gas Saver Capabilities.
• User Friendly digital display key board provides
• Method storage and easy editing facilities.
• Pressure programming.
• Event time settings. 
• Manual flame ignition through keyboard.

Technical Specifications

Column Oven:

•     Size: [H] 290 mm X [w] 280 mm, X[D] 160mm
•     Volume: 13.8 Ltrs.
•     Temperature: 5°C above the ambient temperature to 500 °C
•     Ramp rate: 0.1 °C to 50°C per minute
•     No. of ramps: 10
•     Cooling rate: 350 °C to 50 °C in 7 minutes or less at room temperature below 25°C
•     Temperature Gradient: 2°C max (on 200 mm Dia. Circumference, 40 mm from the sensor)
•     Temperature Accuracy: +/-1% of set value from 50 °C to 500 °C
•     Heated Zones: 3 Independent Heated Zones up to 500 °C for individual control of Injectors, Detectors & Oven.

Pneumatics: 

Electronic pressure controller (EPC) provides excellent performance with capillary columns. 

•     Injectors: Pressure range 0 to 450 kpa. Constant Pressure or constant flow settable.
•     Pressure program: available 
•     Correction Factor: Maintains the constant flow or average linear velocity during oven heating

Injection System:

•     Option for combination of packed S/SL inlets such as one Split/split-less (capillary column) injector and one packed coloumn injector port or dual capilary or dual packed coloumn port as per the requirement 
•  Temperature range settable up to 500 °C. in the step of 1°C.

Detectors:

• Higher sensitivity flame ionization detector.  
•  Dynamic range 107
•  Sensitivity equivalent to 3pg C/sec of Dodecane or less
•  Polarization:  -240 V DC.

Display:

• 80 Characters (20 X 4 lines) LCD

Keyboard:

• 32 Keys for setting of the parameters & eight status LED. indications including oven ramp status
• 4 External event control relay output.          
• Power Requirement: 230V +/- 10V
• Product dimentions: 515W x 450H x 535D mm
• Weight: 37 kgs. (approx.)

Product Application :

Agrochemicals:    

•  Evaluation of technical & formulated material complying BIS & relevant bodies 

API/BDI industries : 

Estimation of residual solvents using HSS.               

•      Estimation of residual solvents using HSS. 
•      Control the quality of solvents/raw materials/reagents.
•      To monitor the course of the reaction whenever possible.               

Environmental :                                     

•     Monitoring the Bap content with other PAHs.
•     Residual pesticides from drinking water.
•     Monitor the Trihalomethane content of the ambient air.
•     PCB content of the oil and water.
•     Gaseous analysis of Hydrocarbon and permanent gases in ambient air             

Petroleum & Refinery :

•  Evaluation of quality of Petroleum-based products

Perfume Industry:

•  Fragrance composition     

Food Industry :   

•  Composition of edible oils with respect to their MUFA,PUFA & SFA evaluation with focus on trans content                  

Petrochemicals:        

•  Evaluation of hydrocarbon blending in wax and other relevant blends                              

Speciality Chemical Industry 

• Quality/Purity evaluation of speciallity chemicals. 

Research:

• Accomplish the special projects that are compatible to GCs.

Polymer:

•  Evaluation of quality of raw materials in the form of monomers & further, detection of these monomers at trace levels in polymers.               

Packaging:

•  Estimation of residual solvents from the packaging materials.                        

Solvent Industry:

•  Evaluation/ Impurity profiling of the of recoverd/distilled solvents  

Beverages:

•  Impurity profiling of alcohol produced