Click Image for Gallery
GENERAL
SPECIFICATIONS | |||
MODEL | PMT/340/130/M | ||
Maximum grinding Length | mm | 300 | |
Height of centre | mm | 130 | |
Max. distance between centers | mm | 340 |
TABLE
Max. Swivel of Table | deg | + 6 | |
Table Traverse | Manually by high precision rack & pinion. | ||
Guide ways coating | Turcite –B slide way coated on both moveable slides to prevent stick slip motion. |
GRINDING WHEEL
Diameter | mm | 350 | |
Width | mm | 25 | |
Bore | mm | 127 | |
Wheel Speed | mm | 1900 - 2100 |
GRINDING WHEEL HEAD
Grinding Wheel Head Bearings | Wheel head Spindle made of alloy steel, specially heat treated, case carburizing, ground, lapped and cartridge type spindle, grease lubricated fitted with high precision imported P4 grade matched pair angular contact bearings of 1 pair in front and 1 pair at rear, which give very high accuracy and excellent surface finish to the work piece. | ||
Manually feed resolution | mm | 0.005 on radius |
WORK HEAD
Bearings | Imported high precision bearings – 6 nos. | ||
No. of Speeds | Infinitely Variable by imported VFD | ||
Speed Range (inf. Variable by 3 phase, VFD) | rpm | 50 - 500 | |
Swivel | deg | ± 45 | |
Spindle Nose Taper | MT | 3 |
TAIL STOCK
Centre | MT | 3 | |
Quill Travel | mm | 25 |
MOTORS POWER
Wheel Head | hp | 2 | |
Work Head | hp | 0.5 | |
Coolant Pump | hp | 0.1 |