Dust Particulate Monitoring Systems

Product Details:

Brand	Applied Techno Systems
Accuracy	+/-2 %
Analog Output	4.0 - 20 mA (Isolated And Scalable)
Supply Voltage	+24 Vdc (Optional 90-260 Vac PSU Available)
Weight	2.5 Kg Per Head.
Country of Origin	Made in India
Current Consumption	400 mA
Material	316 Stainless Steel (Powder Coated)
Dimensions	153 x 120 x 122 mm (Measuring Head)

Technical Specification:

• Parameter Comment Measuring Principle Dynamic Detection Principle, DDP (Scintillation)

• Operating Wavelength 510 – 540 nm (green LED)

• Measurement Reading Concentration (mg/m3)

• Measuring Range 0 – 1000 mg/m3 (user configurable)

• Path Length (duct diameter) 0.5 – 10 m (flange-to-flange separation)

• Accuracy + / - 2 %

• Flue gas flow rate ! 1.0 m/s

• Resolution 0.1 mg/m3 (display resolution)

• Damping 1 – 60 s (user selectable)

• Drift with Temperature < +/- 0.5 %

• Power Air Requirements Voltage +24 Vdc (optional 90-260 Vac PSU available)

• Nominal Current Consumption 400 mAPower 

• Up Current Consumption 400 mA

• Purge Air Supply Volume 50 – 200 L/min (to each air purge body)

• Purge Air Quality Suitably filtered, oil free and dry Interface Options Serial Comms ModBus RTU via RS485Internal USB (OI)External USB (RX)

• Analogue Outputs 4.0 – 20 mA (isolated and scalable)

• Relay Contacts 3 A @ 30 Vdc (signal level and service alarms)

• Physical Ambient Operating Temperature -20 – +55 °C (air temperature around the equipment)

• Exhaust Gas Temperature Up to +600 °C (heat insulating gaskets included)

• Ambient Operating Humidity 0 – 100 %

• Ingress Protection IP65 for external use

• Materials 316 Stainless Steel (powder coated)

• Dimensions 153 x 120 x 122 mm (measuring head)

• Weight 2.5 kg per head.