Our website uses cookies. They help us understand how customers use our website so we can give you the best experience possible. By continuing to browse this site or choosing to close this message, you give consent for cookies to be used. The cookies are not used for advertising. This applies to visitors from EU.
Sample Changer

Sample Changer:

Xsample-340

  • The single sample changer for different syringe sizes
  • The robust solution for reliable and repeatable results
  • Prevents sample carry-over with automatic rinsing and drying after each sample
  • Highly resistant wetted parts for handling aggressive samples

Xsample 340 is a single sample changer for different types of syringes that automatically fills all Anton Paar master instruments using your favorite syringes. Perfect filling and excellent precision are facilitated by the system’s adjustable filling speed. Many years of trouble-free operation are guaranteed due to the straightforward and robust design. Xsample 340 is automatically prepared with up to two cleaning agents, ensuring perfect measuring conditions regardless of the operator and sample.


Key Features

Perfect measuring results due to perfect cleaning

  • Automatic rinsing and drying after each sample prevents sample carry-over which ensures the best measuring results.
  • Up to two different cleaning agents can be used for an individual cleaning procedure.
  • Measurement of a great variety of samples from low-viscosity samples up to 36,000 mPa.s
  • Automatic air check before measurement to rule out sample cross-contamination


Easy handling

  • Different adapters for 2.5 mL and 10 mL Braun syringes for your most frequently used consumables.
  • Depending on the system size, a minimum amount of sample is needed – advisable when handling expensive or hazardous samples.
  • Unified software user interface at the master instrument for easy operation and a short training phase.
  • Force sensor used to adjust the filling speed for optimized filling behavior and reduction of user errors.


Intelligent instrument design

  • For aggressive samples all wetted parts of Xsample 340 are made of highly resistant materials
  • Robust instrument for measurements under harsh environmental conditions.
  • High safety standard: when opening the safety cover the sampling procedure immediately stops in order to protect the operator
  • Space-saving design and quick installation of instrument for self-explanatory start-up before first use


Technical specifications :

Viscosity range36,000 mPa·s at ambient and measuring temperature
Supported syringes
2 mL Luer plastic for sample viscosity up to 36,000 mPa·s
5 mL Luer plastic for sample viscosity up to 10,000 mPa·s
10 mL Luer plastic for sample viscosity up to 9,000 mPa·s
5 mL glass for sample viscosity up to 10,000 mPa·s
Filling modeForce applied by syringe
Minimum sample volume per measurementapprox. 3 mL
depending on system configuration
Rinsing liquid consumption

approx. 7 mL (if rinse time: 10 s)
approx. 11 mL (if rinse time: 15 s)

Compressed air supply0.3 bar (4.35 psi) relative (air supply of the master instrument)
max. 1.5 bar (21.8 psi) relative (air supply of Xsample 340)
optional: 2.0 bar (29 psi) relative (external compressed air)
Necessary quality of airClass 3 from ISO 8573-1:
max. particle size: 5 μm
max. pressure dew point: –20°C (4°F)
max. oil content: 1 mg/m3
Environmental conditions
(EN 61010)
Indoor use only
Air humidity10 to 90% relative humidity, non-condensing
Operating temperature+15 to +35 °C (+59 to +95 °F)
Power supplysupplied by master instrument
Mains voltage according to the type plate at the rear of master instrument (protective grounding required)
Dimensions excl. master instrument
(L x W x H)
480 mm x 230 mm x 420 mm
(18.9 in x 9.1 in x 16.5 in)
Weight excl. master instrumentapprox. 9.4 kg (20.7 lbs)

Write a review

Note: HTML is not translated!
    Bad           Good

Sample Changer

  • ₹0

Seller information

View profile
Please sign in to contact Anton Paar India Pvt. Ltd.

Tags: Sample Changer