Temperature Controller With Blower Control

Product Details :

• Size 48(w)x48(h)x85(d)mm (Model :- WTC-2301-BL)
• Size 72(w)x72(h)x45(d)mm (Model :- WTC-2101-BL)
• Size 96(w)x48(h)x65(d)mm (Model :- WTC-2001-BL)
• Size 96(w)x96(h)x65(d)mm (Model :- WTC-2201-BL)

• microcontroller based
• Four digits dual display
• Supply- 100-260 VAC
• Input -J, K or RTD ,RTD.1selection
• Output: 1. Relay Contact or SSR, 2. Blower contact
• PID – Auto tune or On/Off Control selection
• Heating or Cooling Application selection
• Range: J type 0-750ºC
• K type 0-1200ºC
• RTD.1 type 0.0 to 400.0ºC
• RTD type 0 to 400ºC
• Accuracy of 0.5% of full scale
• Temperature As per range adjustable in set mode.
• Alarm 0.0 to 25.0ºC or 0 to 250ºC as per range adjustable
• Ct 1 to 60 for SSR output & 10 to 120 second for Relay output adjustable
• Auto tuning require for pb, It & dt value
• Hysteresis 0.2 or 2ºCto 25.0 or 25ºC adjustable as per range selection for RTD
• Hysteresis 2 to 250ºC adjustable as per range selection for J & K Type
• Delay 0 to 250 second adjustable for cooling control
• Open display if Sensor break & -rEV display if connections reverse
• Relay trip if sensor breaks, connection open or connection reverse
• Calibration Error correction by a front key switch (No preset setting)
• Configure link at back terminal to avoid unauthentic entry
• Enclosure material: ABS Or Polycarbonate
• Operating Ambient Temp:0ºC to 55ºC.
• Soak Timer Auto or Manual Load selection(optional)
• Soak time adjustable up to 9999 minutes (optional)

Additional Information:

• Item Code: WTC-2XXX-HB