Temperature Controller with Blower Control

Product Details :

• Size 48(w)x48(h)x85(d)mm (Model :- WTC-1301-BL)
• Size 72(w)x72(h)x45(d)mm (Model :- WTC-1101-BL)
• Size 96(w)x48(h)x65(d)mm (Model :- WTC-1001-BL)
• Size 96(w)x96(h)x65(d)mm (Model :- WTC-1201-BL)

• Microcontroller based
• Four digit display
• Supply- 100-260 VAC
• Input- J, K or RTD selection
• Output: 1. Relay Contact or SSR, 2. Blower contact
• PID – Auto tune or On/Off Control selection
• Range: J type 0-750ºC,
• K type 0-1200ºC
• RTD.1 type 0.0 to 400.0ºC
• RTD type 0 to 400ºC
• Accuracy of 0.5% of full scale
• Temperature As per range adjustable in set mode.
• Alarm 0.0 to 25.0 or 0 to 250 as per range adjustable
• Ct 1 to 60 for ssr output & 10 to 120 second for Relay output adjustable
• Auto-tuning require for PB, It & dt value
• Hysteresis 0.2 or 2ºC to 25.0 or 25ºC adjustable as per range selection for RTD
• Hysteresis 2 to 250ºC adjustable as per range selection for J & K Type
• Delay 0 to 250 second adjustable for cooling control
• Open display if Sensor break & -rEV display if connections reverse.
• Relay trip if sensor breaks, connection open or connection reverse.
• Calibration Error correction by a front key switch (No preset setting)
• Configure link at back terminal to avoid unauthentic entry.
• Enclosure material: ABS Or Polycarbonate
• Operating Ambient Temp:0ºC to 55ºC.
• Soak Timer Auto or Manual Load selection(optional)
• Soak time adjustable up to 9999 minutes (optional)

Additional Information:

• Item Code: WTC-1XXX-HB