Click Image for Gallery
TECHNICAL PARAMETERS
- Temperature Range: 4 to 60°C
- Temperature Stability: < +1°C
- Housing Material: CRC / Mild Steel Sheet duly Powder Coated
- Power Consumption: 220/230V,AC ±10% 50Hz Single Phase
- Safety Function: Water Level & Low water level cut off Alarm.
- Duty Cycle: Continuous
- Interior: S.S.304 Polished Sheets
Specification:
- Low Cost PUF insulation
- CFC Free
- Precise Hot Air & Humidity
- Better Mineral / Puff Insulation keep the surface Temperature comfortable & Avoid Heat & Humidity Loss.
- Silent Hot Air Blower, Unique design of Air Circulation & Humidity circulation & improved Temperature / Humidity distribution.
- Unique design of Ventilation.
- Polish 304 grade of S. Steel interior Corrosion resistant long life operation
- Kanthal A-1 Tubular heater is fitted for better circulation.
- Kanthal A-1 steel Tubular heater J shape is fitted in the steam Bath for long life & better result.
- Full feature with Temp. Controller i.e. Thermostat Bi-Metallic Capillary type for both dry & wet.
- Angle Iron frame with castor wheel for easy movement (for Refrigerated model .
- Fitted with 02 Nos. Fan for cooling & heating (For Refrigerated Model). Technical Design and Construction Silent fan motor to maintain uniform temperature and humidity.
- Filled with 02 Nos. Circulation motor for water injection in routine model inside the control unit & Chamber.
- Humidity uniformity + 5% RH
- Humidity control accuracy ± 1%
- Humidity Sensor Ultra sonic
- Capacitive Exterior Construction CRCA Powder coated.
- Shelves 3-5 nos Self construction SS 304 perforated.
- Electrical 220 to 240 volts Alarm
- High and low RH Range 5% To 95 % RH
- RH Accuracy +2° c or Better
- Light Intensities 0-25000 lux
- Humidity deviation 3% RH
GROWTH CHAMBER are widely used in
- Electronic Industry for Delicate Parts
- Hospitals and Medical Facilities
- Dental Office & Laboratories
- Industrial Manufacturing
- Auto Industry for Rugged parts
- Engineering Industries
- Research Centers/Universities FEATURES
- Programmable controller provides automatic operation of variable temperature, humidity and illumination value.
- Self-Diagnostic Function automatically checks any malfunction and make warning signal.
- Technical Design and Construction Silent fan motor to maintain uniform temperature and humidity
TEMPERATURE CONTROL
- The temperature is efficiently controlled by PLC based HMI interactive control panel.
- Heater Mode : This LED indicates the heating system on condition and it light up when the set temperature is higher than the ambient temperature.
- Cooling Mode: This LED indicates the cooling system on condition and it light up when the set temperature is lower than the ambient temperature.
- Temperature Alarm: This LED indicated the extreme Ambient condition and the temperature failure condition.
- Audio Alarm : This Alarm indicates the visual alarm and indiactes any failure and Temperature overshoot conditions.
- Door Open : Visual indication with door open conditions.
- UP: Count up key.
- SET: This is a set button to set any parameter on the screen, by pressing of this key a cursor blink on the corresponding parameter, So you can select any desired parameter and use UP and Down key to set specific value/setting.
- Down: Down count key.
HUMIDITY RANGE 20%+ 90% (as per the graph attached)/ (As per the temperature Requirements). SYSTEM SETTING I)
DATE and TIME: From normal operational mode, press SET key ones, The cursor blinks at DATE (20), and for second press of KEY SET the cursor blinks at MONTH ( 12 ), and similarly on Third press of key SET cursor blinks at YEAR and repeat the steps to move to any parameter.
Similarly you move cursor on any parameter and set desired value for system operation.,To increase any parameter use UP key and to decrease any parameter use DOWN key.After completion of all correct setting press ESC key to return back to the main menu. II. Relays rated min. 200VAC
Compressor: min. 8 A, min. 60 LRA b. Fan: min. 4 A c.
High/low temp alarm. III. Keyed alarm silence switch IV. External Keyed Alarm Mute.
Alternate: Supervisor programmable code. V. Door Buzzer alarm VI. Mounted temp probe. HEATING Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring very good temperature sensitivity.
COOLING
An energy efficient cooling unit is installed in our temperature and humidity control cabinet s to enable bio chemical demand, cyclic and growth studies at lower room temperatures. We use ISI marked high end CFC free compressors of Kirloskar/Tecumseh make, conforming to latest international standards and guideline. HUMIDITY RANGE The temperature inside our temperature and humidity control cabinets is controlled through programmable micro-processor based temperature controller cum indicator.
TEMPERATURE RANGE
Temperature ranges of our standard models are 4-60°C (Without illumination) 10 to 60c (with illumination). However we have the capacity to modify the same to suit the individual specialized requirements of our customers. TEMPERATURE SENSITIVITY Temperature inside our temperature and humidity control cabinets is controlled with a sensitivity of +1° c or better.
FRONT PANEL
Front panel of our units comprises of on/off switches heating, cooling and mains indicator lamps, temperature controllers.
PLANT GROWTH CHAMBER
- Views: 426
-
Biotechnologies Inc - Vendor Type: Manufacturer
- Product Code: BTI0000028
- Availability: In Stock
- ₹0
